2021 Orbea Carpe 10 XL
Build
700C/29 in × 38 mm
Insights
Design deviates from other sizes of Orbea Carpe
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 625mm |
| Reach | 410mm |
| Stack to Reach Ratio | 1.52:1 |
| Seat Tube Length, C-T | 580mm |
| Top Tube Length, Effective/Horizontal Center | 601mm |
| Top Tube Slope | 6.9deg |
| Head Tube Angle | 72deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 200mm |
| Bottom Bracket Drop | 66mm |
| Bottom Bracket Height | 283mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 430mm |
| Front-Center | 648.4mm |
| Front-Center Horizontal | 645mm |
| Wheelbase | 1075mm |
| Fork Offset/Rake | 51mm |
| Fork Length, Unknown | 400mm |
| Trail | 59.8mm mid/neutral |
| Mechanical Trail | 56.9mm |
| Wheel Flop | 17.6mm |
| Standover Height | 852mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 129.4mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 113mm |
10 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 38mm |
| Tire Outer Diameter | 698mm |
| Bike Length with Tires | 1773mm |
| Crank Length | 170mm |
| Handlebar Width | 680mm |
| Stem Length | 75mm |
| Suspension Type | Rigid, non-suspension corrected |
| Bar Type | Flat Bar |
| Frame Material | Aluminum |
| Fork Material | Carbon/Composite |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 190 cm to 200 cm |
Source:https://www.orbea.com/gb-en/bicycles/urban/carpe/cat/carpe-10