2021 Orbea OIZ M PRO XL-TR
Build
700C/29 in × 2.35 in
Insights
Somewhat upright stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Orbea OIZ
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 622mm |
| Reach | 466mm |
| Stack to Reach Ratio | 1.33:1 |
| Seat Tube Length, C-T | 520mm |
| Top Tube Length, Effective/Horizontal Center | 643mm |
| Top Tube Slope | 11.3deg |
| Head Tube Angle | 68deg |
| Seat Tube Angle | 74deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 40mm |
| Bottom Bracket Height | 330.7mm |
| Chainstay Length | 430mm |
| Chainstay Length Horizontal | 428.1mm |
| Front-Center | 748.9mm |
| Front-Center Horizontal | 747.9mm |
| Wheelbase | 1176mm |
| Fork Offset/Rake | 43.3mm |
| Fork Length (On-Axis) | 524mm |
| Trail | 103.1mm very high |
| Mechanical Trail | 95.5mm |
| Wheel Flop | 35.8mm |
| Standover Height | 756mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 203.2mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 155.7mm |
M PRO Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1917.4mm |
| Crank Length | 175mm |
| Handlebar Width | 760mm |
| Stem Length | 90mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 185 cm to 198 cm |
Source:https://www.orbea.com/gb-en/bicycles/mountain/oiz/cat/oiz-m-pro