2020 Orbea OIZ H10 M-29”-XC
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Orbea OIZ
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 591mm |
| Reach | 435mm |
| Stack to Reach Ratio | 1.36:1 |
| Seat Tube Length, C-T | 432mm |
| Top Tube Length, Effective/Horizontal HT Top | 593mm |
| Top Tube Slope | 17.6deg |
| Head Tube Angle | 69deg |
| Seat Tube Angle | 75deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 47mm |
| Bottom Bracket Height | 323.7mm |
| Chainstay Length Horizontal | 435mm |
| Front-Center | 689.6mm |
| Front-Center Horizontal | 688mm |
| Wheelbase | 1123mm |
| Fork Offset/Rake | 44mm |
| Fork Length (On-Axis) | 504mm |
| Trail | 95.2mm very high |
| Mechanical Trail | 88.8mm |
| Wheel Flop | 31.8mm |
| Standover Height | 738mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 148.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 153.7mm |
H10 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1864.4mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 165 cm to 180 cm |
Source:https://www.orbea.com/se-en/bicycles/mountain/oiz/cat/oiz-29-h10