2024 Kona Bicycle Company Process 153 CR/DL 29
- Category
- Hardtail All-mountain/Enduro MTB
- Design
- Flat Bar, Full suspension
Suspension sag unknown Geometry may mis-represent actual riding geometry | Average stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Somewhat aggressive stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Somewhat aggressive stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Somewhat aggressive stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry |
Geometry
Size | S | M | L | XL | |
Stack | — | 615mm | 615mm | 625mm | 635mm |
Reach | — | 430mm | 455mm | 480mm | 515mm |
Stack to Reach Ratio | — | 1.43:1 | 1.35:1 | 1.3:1 | 1.23:1 |
Seat Tube Length, Unknown | — | 380mm | 380mm | 420mm | 450mm |
Top Tube Length, Effective/Horizontal Unknown | — | 574mm | 599mm | 628mm | 667mm |
Top Tube Slope | — | 25.4deg | 24.4deg | 20.6deg | 17.7deg |
Head Tube Angle | — | 64.5deg | 64.5deg | 64.5deg | 64.5deg |
Seat Tube Angle | — | 76.9deg | 76.9deg | 76.7deg | 76.6deg |
Head Tube Length | — | 94mm | 94mm | 105mm | 116mm |
Bottom Bracket Drop | — | 20mm | 30mm | 30mm | 30mm |
Bottom Bracket Height | — | 293.4mm | 283.4mm | 283.4mm | 283.4mm |
Chainstay Length | — | 435mm | 435mm | 435mm | 435mm |
Chainstay Length Horizontal | — | 434.5mm | 434mm | 434mm | 434mm |
Front-Center | — | 756mm | 781mm | 811mm | 851mm |
Front-Center Horizontal | — | 755.5mm | 781mm | 810mm | 850mm |
Wheelbase | — | 1190mm | 1215mm | 1244mm | 1284mm |
Fork Offset/Rake | — | 44mm | 44mm | 44mm | 44mm |
Fork Length, Unknown | — | 571mm | 571mm | 571mm | 571mm |
Trail | — — | 100.7mm very high | 100.7mm very high | 100.7mm very high | 100.7mm very high |
Mechanical Trail | — | 90.9mm | 90.9mm | 90.9mm | 90.9mm |
Wheel Flop | — | 39.1mm | 39.1mm | 39.1mm | 39.1mm |
Standover Height | — | 690mm | 700mm | 710mm | 720mm |
Tire to Pedal Spindle | — 170 mm cranks | 272.6mm 170 mm cranks | 297.6mm 170 mm cranks | 327.6mm 170 mm cranks | 367.6mm 170 mm cranks |
Pedal Spindle to Ground Clearance | — 170 mm cranks | 123.4mm 170 mm cranks | 113.4mm 170 mm cranks | 113.4mm 170 mm cranks | 113.4mm 170 mm cranks |
CR/DL 29 Build
Size | S | M | L | XL | |
Wheel Size | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD |
Tire Width | 2.4mm | 2.4mm | 2.4mm | 2.4mm | 2.4mm |
Tire Outer Diameter | 626.8mm | 626.8mm | 626.8mm | 626.8mm | 626.8mm |
Bike Length with Tires | — | 1816.8mm | 1841.8mm | 1870.8mm | 1910.8mm |
Stack and Reach vs. Category Trend
Very Upright
Somewhat Upright
Average
Somewhat Aggressive
Very Aggressive
The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.
Learn more about the Upright/Aggressive ScaleCategory Trend
Hardtail All-mountain/Enduro MTBSource:https://www.konaworld.com/en-ca/products/process-153-cr-dl-g3