Bike-on-Bike
Default Config
Insights
Somewhat aggressive stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Design deviates from other sizes of Kona Bicycle Company Process 153
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 635mm | — |
Reach | 515mm | — |
Stack to Reach Ratio | 1.23:1 | — |
Seat Tube Length, Unknown | 450mm | — |
Top Tube Length, Effective/Horizontal Unknown | 667mm | — |
Top Tube Slope | 17.7deg | — |
Head Tube Angle | 64.5deg | — |
Seat Tube Angle | 76.6deg | — |
Head Tube Length | 116mm | — |
Bottom Bracket Drop | 30mm | — |
Bottom Bracket Height | 283.4mm | — |
Chainstay Length | 435mm | — |
Chainstay Length Horizontal | 434mm | — |
Front-Center | 851mm | — |
Front-Center Horizontal | 850mm | — |
Wheelbase | 1284mm | — |
Fork Offset/Rake | 44mm | — |
Fork Length, Unknown | 571mm | — |
Trail | 100.7mm very high | — — |
Mechanical Trail | 90.9mm | — |
Wheel Flop | 39.1mm | — |
Standover Height | 720mm | — |
Tire to Pedal Spindle | 367.6mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 113.4mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.4mm | — |
Tire Outer Diameter | 626.8mm | — |
Bike Length with Tires | 1910.8mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Flat Bar | — |
| Fork Travel | Unknown | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Unknown | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://www.konaworld.com/en-ca/products/process-153-cr-dl-g3 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |