2024 Kona Bicycle Company Process 153 CR/DL 29 M
Build
700C/29 in × 2.4 mm
Insights
Somewhat aggressive stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Design deviates from other sizes of Kona Bicycle Company Process 153
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 615mm |
| Reach | 455mm |
| Stack to Reach Ratio | 1.35:1 |
| Seat Tube Length, Unknown | 380mm |
| Top Tube Length, Effective/Horizontal Unknown | 599mm |
| Top Tube Slope | 24.4deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 76.9deg |
| Head Tube Length | 94mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 283.4mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434mm |
| Front-Center | 781mm |
| Front-Center Horizontal | 781mm |
| Wheelbase | 1215mm |
| Fork Offset/Rake | 44mm |
| Fork Length, Unknown | 571mm |
| Trail | 100.7mm very high |
| Mechanical Trail | 90.9mm |
| Wheel Flop | 39.1mm |
| Standover Height | 700mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 297.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 113.4mm |
CR/DL 29 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4mm |
| Tire Outer Diameter | 626.8mm |
| Bike Length with Tires | 1841.8mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.konaworld.com/en-ca/products/process-153-cr-dl-g3