2026 FRAMEWORKS Racing DH Base Medium
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension downhill/freeride mtb bikes
Design deviates from other sizes of FRAMEWORKS Racing DH
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension downhill/freeride mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 648mm |
| Reach | 465mm |
| Stack to Reach Ratio | 1.39:1 |
| Seat Tube Length, Unknown | 375mm |
| Top Tube Slope | 27.5deg |
| Head Tube Angle | 63deg |
| Seat Tube Angle | 78.8deg |
| Effective Seat Tube Angle, Seat Tube Top | 82.3deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 35mm |
| Bottom Bracket Height | 339.5mm |
| Chainstay Length | 452mm |
| Chainstay Length Horizontal | 450.6mm |
| Front-Center | 838.1mm |
| Front-Center Horizontal | 837.4mm |
| Wheelbase | 1288mm |
| Fork Offset/Rake | 52mm |
| Fork Length (On-Axis) | 602mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 118mm |
| Wheel Flop | 53.6mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 293.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 169.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 2037mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 203mm |
| Rear Travel | 206mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:rideframeworks.com