2026 Yeti Cycles ASR 40th Anniversary XL
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Yeti Cycles ASR
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 634mm |
| Reach | 485mm |
| Stack to Reach Ratio | 1.31:1 |
| Seat Tube Length, C-T | 495mm |
| Top Tube Length, Effective/Horizontal Center | 655mm |
| Head Tube Angle | 66.1deg |
| Effective Seat Tube Angle, ETT Center | 75deg |
| Head Tube Length | 133mm |
| Bottom Bracket Drop | 35mm |
| Bottom Bracket Height | 337mm |
| Chainstay Length | 441mm |
| Chainstay Length Horizontal | 439.6mm |
| Front-Center | 799mm |
| Front-Center Horizontal | 801.4mm |
| Wheelbase | 1241mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 541mm |
| Trail | 116.7mm very high |
| Mechanical Trail | 106.7mm |
| Wheel Flop | 43.2mm |
| Standover Height | 780mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 257mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 167mm |
40th Anniversary Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1984.9mm |
| Crank Length | 170mm |
| Handlebar Width | 760mm |
| Stem Length | 55mm |
| Stem Angle | 0deg |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 130mm |
| Rear Travel | 115mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 185 cm to 201 cm |
Source:yeticycles.com