2026 retrotec Funduro Base SM
Build
700C/29 in × 2.6 in
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Design deviates from other sizes of retrotec Funduro
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail trail mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 626mm |
| Reach | 425mm |
| Stack to Reach Ratio | 1.47:1 |
| Seat Tube Length, Unknown | 405mm |
| Top Tube Length, Effective/Horizontal Center | 593mm |
| Top Tube Slope | 23.9deg |
| Head Tube Angle | 65deg |
| Seat Tube Angle | 75deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 68mm |
| Bottom Bracket Height | 309mm |
| Chainstay Length | 440mm |
| Chainstay Length Horizontal | 434.7mm |
| Front-Center | 737mm |
| Front-Center Horizontal | 733.9mm |
| Wheelbase | 1168.6mm |
| Fork Offset/Rake | 120mm |
| Trail | 43.4mm low |
| Mechanical Trail | 39.3mm |
| Wheel Flop | 16.6mm |
| Standover Height | 802mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 190mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 139mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1922.7mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 130mm |
| Suspension Sag | Unknown |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 7 in to 5 ft 10 in |
Source:https://ingliscycles.com/products/funduro-production