Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of hardtail trail mtb bikes
Design deviates from other sizes of retrotec Funduro
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs hardtail trail mtb bikesCategory: Flat Bar
Geometry
Stack | 626mm | — |
Reach | 425mm | — |
Stack to Reach Ratio | 1.47:1 | — |
Seat Tube Length, Unknown | 405mm | — |
Top Tube Length, Effective/Horizontal Center | 593mm | — |
Top Tube Slope | 23.9deg | — |
Head Tube Angle | 65deg | — |
Seat Tube Angle | 75deg | — |
Head Tube Length | 90mm | — |
Bottom Bracket Drop | 68mm | — |
Bottom Bracket Height | 309mm | — |
Chainstay Length | 440mm | — |
Chainstay Length Horizontal | 434.7mm | — |
Front-Center | 737mm | — |
Front-Center Horizontal | 733.9mm | — |
Wheelbase | 1168.6mm | — |
Fork Offset/Rake | 120mm | — |
Trail | 43.4mm low | — — |
Mechanical Trail | 39.3mm | — |
Wheel Flop | 16.6mm | — |
Standover Height | 802mm | — |
Tire to Pedal Spindle | 190mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 139mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.6in | — |
Tire Outer Diameter | 754.1mm | — |
Bike Length with Tires | 1922.7mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 130mm | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Steel | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | — | |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |