2025 Norco Bicycles Revolver Gen 4 120 Frameset 4
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Revolver Gen 4 120
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 616mm |
| Reach | 497.5mm |
| Stack to Reach Ratio | 1.24:1 |
| Seat Tube Length, C-T | 477mm |
| Top Tube Length, Effective/Horizontal Unknown | 654mm |
| Head Tube Angle | 66.5deg |
| Effective Seat Tube Angle, Unknown | 75.75deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 36mm |
| Bottom Bracket Height | 334.7mm |
| Chainstay Length | 434mm |
| Chainstay Length Horizontal | 432.5mm |
| Front-Center | 798.3mm |
| Front-Center Horizontal | 797.5mm |
| Wheelbase | 1230mm |
| Fork Offset/Rake | 44mm |
| Trail | 113.2mm very high |
| Mechanical Trail | 103.8mm |
| Wheel Flop | 41.4mm |
| Standover Height | 692mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 252.6mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 159.7mm |
Frameset Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1971.4mm |
| Crank Length | 175mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.norco.com/bikes/mountain/cross-country/revolver-gen-4-120/2026-revolver-c-frame-kit/