2025 Norco Bicycles Revolver Gen 4 120 Frameset 1
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Revolver Gen 4 120
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 589mm |
| Reach | 422.5mm |
| Stack to Reach Ratio | 1.39:1 |
| Seat Tube Length, C-T | 392mm |
| Top Tube Length, Effective/Horizontal Unknown | 580mm |
| Head Tube Angle | 66.5deg |
| Effective Seat Tube Angle, Unknown | 75deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 36mm |
| Bottom Bracket Height | 334.7mm |
| Chainstay Length | 422mm |
| Chainstay Length Horizontal | 420.5mm |
| Front-Center | 711.5mm |
| Front-Center Horizontal | 710.5mm |
| Wheelbase | 1131mm |
| Fork Offset/Rake | 44mm |
| Trail | 113.2mm very high |
| Mechanical Trail | 103.8mm |
| Wheel Flop | 41.4mm |
| Standover Height | 677mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 175.8mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 169.7mm |
Frameset Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1872.4mm |
| Crank Length | 165mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.norco.com/bikes/mountain/cross-country/revolver-gen-4-120/2026-revolver-c-frame-kit/