2024 V5 Commencal Supreme DH DH V5 M Low
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension downhill/freeride mtb bikes
Design deviates from other sizes of Commencal Supreme DH
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension downhill/freeride mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 649mm |
| Reach | 456mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, C-T | 370mm |
| Top Tube Length, Effective/Horizontal Center | 621mm |
| Top Tube Slope | 27.2deg |
| Head Tube Angle | 63.3deg |
| Seat Tube Angle | 67.1deg |
| Head Tube Length | 112mm |
| Bottom Bracket Drop | 20mm |
| Bottom Bracket Height | 352mm |
| Chainstay Length | 454mm |
| Chainstay Length Horizontal | 453.6mm |
| Front-Center | 829.7mm |
| Front-Center Horizontal | 829.4mm |
| Wheelbase | 1283mm |
| Fork Offset/Rake | 52mm |
| Fork Length (On-Axis) | 612mm |
| Trail | 128.9mm very high |
| Mechanical Trail | 115.1mm |
| Wheel Flop | 51.7mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 292.7mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 187mm |
DH V5 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 2026.9mm |
| Crank Length | 165mm |
| Handlebar Width | 800mm |
| Stem Length | 45mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 168 cm to 180 cm |
Source:https://www.commencal.com/au/en/commencal-supreme-dh-v5-signature-ltd-pure-white-australia/BT3SUPV5SGUK2.html