2024 Intense Cycles M1 Pro MD
Build
29mm BSD × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension downhill/freeride mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 628mm |
| Reach | 450mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, C-T | 405mm |
| Top Tube Length, Effective/Horizontal Center | 613mm |
| Top Tube Slope | 23.3deg |
| Head Tube Angle | 63deg |
| Seat Tube Angle | 57deg |
| Effective Seat Tube Angle, Unknown | 75deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 0.5mm |
| Bottom Bracket Height | 77.5mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 445mm |
| Front-Center | 818mm |
| Front-Center Horizontal | 818mm |
| Wheelbase | 1263mm |
| Fork Offset/Rake | 43mm |
| Fork Length (Axle-To-Crown) | 605mm |
| Trail | -8.5mm |
| Mechanical Trail | -7.6mm |
| Wheel Flop | -3.4mm |
| Standover Height | 821mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 570mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | -92.5mm |
Pro Build
| Wheel Size | 29mm BSD |
| Tire Width | 2.5in |
| Tire Outer Diameter | 156mm |
| Bike Length with Tires | 1419mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 5 ft 4 in to 5 ft 10 in |
Source:https://intensecycles.com/products/m1-pro