2024 Airdrop Bikes Slacker S1 S2
Build
650B/27.5 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension downhill/freeride mtb bikes
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension downhill/freeride mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 619.4mm |
| Reach | 455mm |
| Stack to Reach Ratio | 1.36:1 |
| Seat Tube Length, Unknown | 410mm |
| Top Tube Slope | 21.5deg |
| Head Tube Angle | 63deg |
| Seat Tube Angle | 69deg |
| Head Tube Length | 115mm |
| Bottom Bracket Drop | -12mm |
| Bottom Bracket Height | 365mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434.8mm |
| Front-Center | 803.9mm |
| Front-Center Horizontal | 803.8mm |
| Wheelbase | 1238.6mm |
| Fork Offset/Rake | 36mm |
| Fork Length, Unknown | 200mm |
| Trail | 139.4mm very high |
| Mechanical Trail | 124.2mm |
| Wheel Flop | 56.4mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 285.9mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 200mm |
S1 Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 705.9mm |
| Bike Length with Tires | 1944.5mm |
| Crank Length | 165mm |
| Handlebar Width | 800mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 200mm |
| Rear Travel | 200mm |
| Suspension Sag | 30% |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 168 cm to 183 cm |
Source:https://www.airdropbikes.com/en-us/pages/airdrop-slacker