2024 Ibis Cycles Inc. Ripmo V3 Base LG
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripmo V3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 643mm |
| Reach | 506mm |
| Stack to Reach Ratio | 1.27:1 |
| Seat Tube Length, C-T | 457mm |
| Top Tube Length, Actual C-C | 655mm |
| Top Tube Slope | 18deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 77deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 27mm |
| Bottom Bracket Height | 343.7mm |
| Chainstay Length | 438mm |
| Chainstay Length Horizontal | 437.2mm |
| Front-Center | 849.3mm |
| Front-Center Horizontal | 848.8mm |
| Wheelbase | 1286mm |
| Fork Offset/Rake | 44.2mm |
| Trail | 127.8mm very high |
| Mechanical Trail | 115.3mm |
| Wheel Flop | 49.7mm |
| Standover Height | 772mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 308.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 173.7mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 2027.4mm |
| Crank Length | 170mm |
| Handlebar Width | 800mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 160mm |
| Rear Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.ibiscycles.com/bikes/ripmo