Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripmo V3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 643mm | — |
Reach | 506mm | — |
Stack to Reach Ratio | 1.27:1 | — |
Seat Tube Length, C-T | 457mm | — |
Top Tube Length, Actual C-C | 655mm | — |
Top Tube Slope | 18deg | — |
Head Tube Angle | 64.5deg | — |
Seat Tube Angle | 77deg | — |
Head Tube Length | 125mm | — |
Bottom Bracket Drop | 27mm | — |
Bottom Bracket Height | 343.7mm | — |
Chainstay Length | 438mm | — |
Chainstay Length Horizontal | 437.2mm | — |
Front-Center | 849.3mm | — |
Front-Center Horizontal | 848.8mm | — |
Wheelbase | 1286mm | — |
Fork Offset/Rake | 44.2mm | — |
Trail | 127.8mm very high | — — |
Mechanical Trail | 115.3mm | — |
Wheel Flop | 49.7mm | — |
Standover Height | 772mm | — |
Tire to Pedal Spindle | 308.6mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 173.7mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.35in | — |
Tire Outer Diameter | 741.4mm | — |
Bike Length with Tires | 2027.4mm | — |
Crank Length | 170mm | — |
Handlebar Width | 800mm | — |
Stem Length | 50mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 160mm | — |
| Rear Travel | 150mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://www.ibiscycles.com/bikes/ripmo | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |