2017 Norco Bicycles Revolver HT 9.1 HT S
Build
29mm BSD × 2.2 in
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Revolver HT
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 611mm |
| Reach | 390mm |
| Stack to Reach Ratio | 1.57:1 |
| Seat Tube Length, C-T | 405mm |
| Top Tube Length, Effective/Horizontal Center | 568mm |
| Top Tube Slope | 23.8deg |
| Head Tube Angle | 70.25deg |
| Seat Tube Angle | 73.75deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 65mm |
| Bottom Bracket Height | 5.4mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 430.1mm |
| Front-Center | 638mm |
| Front-Center Horizontal | 634.9mm |
| Wheelbase | 1065mm |
| Fork Offset/Rake | 46mm |
| Fork Length (Axle-To-Crown) | 506mm |
| Trail | -23.6mm |
| Mechanical Trail | -22.2mm |
| Wheel Flop | -7.5mm |
| Standover Height | 745mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 397.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | -164.6mm |
9.1 HT Build
| Wheel Size | 29mm BSD |
| Tire Width | 2.2in |
| Tire Outer Diameter | 140.8mm |
| Bike Length with Tires | 1205.8mm |
| Crank Length | 170mm |
| Handlebar Width | 720mm |
| Stem Length | 90mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.norco.com/bike-archives/2017/revolver-91-ht/