Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Revolver HT
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Geometry
Stack | 611mm | — |
Reach | 390mm | — |
Stack to Reach Ratio | 1.57:1 | — |
Seat Tube Length, C-T | 405mm | — |
Top Tube Length, Effective/Horizontal Center | 568mm | — |
Top Tube Slope | 23.8deg | — |
Head Tube Angle | 70.25deg | — |
Seat Tube Angle | 73.75deg | — |
Head Tube Length | 90mm | — |
Bottom Bracket Drop | 65mm | — |
Bottom Bracket Height | 5.4mm | — |
Chainstay Length | 435mm | — |
Chainstay Length Horizontal | 430.1mm | — |
Front-Center | 638mm | — |
Front-Center Horizontal | 634.9mm | — |
Wheelbase | 1065mm | — |
Fork Offset/Rake | 46mm | — |
Fork Length (Axle-To-Crown) | 506mm | — |
Trail | -23.6mm | — — |
Mechanical Trail | -22.2mm | — |
Wheel Flop | -7.5mm | — |
Standover Height | 745mm | — |
Tire to Pedal Spindle | 397.6mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | -164.6mm 170 mm cranks | — |
Build
Wheel Size | 29mm BSD 29 mm BSD | — — |
Tire Width | 2.2in | — |
Tire Outer Diameter | 140.8mm | — |
Bike Length with Tires | 1205.8mm | — |
Crank Length | 170mm | — |
Handlebar Width | 720mm | — |
Stem Length | 90mm | — |
| Suspension Type | Hardtail (Front suspension) | — |
| Bar Type | Flat Bar | — |
| Fork Travel | Unknown | — |
| Rear Travel | Unknown | — |
| Suspension Sag | Unknown | — |
| Frame Material | Unknown | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://www.norco.com/bike-archives/2017/revolver-91-ht/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |