2023 Orbea Carpe 20 S
Build
700C/29 in × 38 mm
Insights
Design deviates from other sizes of Orbea Carpe
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 552mm |
| Reach | 388mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, C-T | 480mm |
| Top Tube Length, Effective/Horizontal Center | 546mm |
| Top Tube Slope | 9.9deg |
| Head Tube Angle | 71deg |
| Seat Tube Angle | 74deg |
| Head Tube Length | 127mm |
| Bottom Bracket Drop | 70mm |
| Bottom Bracket Height | 279mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 429.3mm |
| Front-Center | 611.7mm |
| Front-Center Horizontal | 607.7mm |
| Wheelbase | 1037mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 400mm |
| Trail | 66.2mm high |
| Mechanical Trail | 62.6mm |
| Wheel Flop | 20.4mm |
| Standover Height | 768mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 92.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 109mm |
20 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 38mm |
| Tire Outer Diameter | 698mm |
| Bike Length with Tires | 1735mm |
| Crank Length | 170mm |
| Handlebar Width | 640mm |
| Stem Length | 70mm |
| Stem Angle | 7deg |
| Suspension Type | Rigid, non-suspension corrected |
| Bar Type | Flat Bar |
| Frame Material | Aluminum |
| Fork Material | Aluminum |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 160 cm to 170 cm |
Source:https://www.orbea.com/pl-en/bicycles/urban/carpe/cat/carpe-20-2023