2024 Cannondale Bikes Scalpel 4 Large
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Cannondale Bikes Scalpel
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 607mm |
| Reach | 475mm |
| Stack to Reach Ratio | 1.28:1 |
| Seat Tube Length, C-T | 445mm |
| Top Tube Length, Actual C-C | 584mm |
| Top Tube Slope | 16.7deg |
| Head Tube Angle | 66.6deg |
| Seat Tube Angle | 71.7deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 42mm |
| Bottom Bracket Height | 330mm |
| Chainstay Length | 442mm |
| Chainstay Length Horizontal | 440mm |
| Front-Center | 763mm |
| Front-Center Horizontal | 762mm |
| Wheelbase | 1202mm |
| Fork Offset/Rake | 44mm |
| Trail | 113mm very high |
| Mechanical Trail | 103.7mm |
| Wheel Flop | 41.2mm |
| Standover Height | 752mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 221mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 160mm |
4 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1945.9mm |
| Handlebar Width | 760mm |
| Stem Angle | -6deg |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Source:cannondale.com/en-us/bikes/mountain/cross-country/scalpel/scalpel-4-c24554u