2020 Pole Bicycles Evolink 158 Base XL
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 652mm |
| Reach | 535mm |
| Stack to Reach Ratio | 1.22:1 |
| Seat Tube Length, C-T | 480mm |
| Top Tube Length, Effective/Horizontal Center | 669mm |
| Top Tube Slope | 16deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 78deg |
| Head Tube Length | 135mm |
| Bottom Bracket Drop | -17mm |
| Bottom Bracket Height | 389mm |
| Chainstay Length | 455mm |
| Chainstay Length Horizontal | 454.7mm |
| Front-Center | 897mm |
| Front-Center Horizontal | 898.3mm |
| Wheelbase | 1353mm |
| Fork Offset/Rake | 44mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 119.1mm |
| Wheel Flop | 52.2mm |
| Standover Height | 727mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 355mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 219mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 2096.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 180mm |
| Rear Travel | 158mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 190 cm to 200 cm |
Source:https://geometrygeeks.bike/bike/pole-evolink-158-2020/