2018 Pole Bicycles Machine Base L
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 660mm |
| Reach | 510mm |
| Stack to Reach Ratio | 1.29:1 |
| Seat Tube Length, C-T | 480mm |
| Top Tube Length, Effective/Horizontal Center | 637mm |
| Head Tube Angle | 63.9deg |
| Effective Seat Tube Angle, ETT Center | 79deg |
| Head Tube Length | 135mm |
| Bottom Bracket Drop | 20mm |
| Bottom Bracket Height | 352mm |
| Chainstay Length | 455mm |
| Chainstay Length Horizontal | 454.6mm |
| Front-Center | 880.7mm |
| Front-Center Horizontal | 880mm |
| Wheelbase | 1335mm |
| Fork Offset/Rake | 51mm |
| Trail | 125.4mm very high |
| Mechanical Trail | 112.6mm |
| Wheel Flop | 49.6mm |
| Standover Height | 360mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 338.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 182mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 2078.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 180mm |
| Rear Travel | 160mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 180 cm to 190 cm |
Source:https://geometrygeeks.bike/bike/pole-machine-2018/