2021 Norco Bicycles Revolver FS 120 Carbon, 29er, 120mm rear, 120mm fork SM
Build
700C/29 in × 2.35 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Norco Bicycles Revolver FS 120
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension cross-country mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 587mm |
| Reach | 418mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, Unknown | 425mm |
| Top Tube Length, Effective/Horizontal Unknown | 577mm |
| Top Tube Slope | 18.5deg |
| Head Tube Angle | 67.4deg |
| Seat Tube Angle | 74.8deg |
| Head Tube Length | 90mm |
| Bottom Bracket Drop | 32mm |
| Bottom Bracket Height | 338.7mm |
| Chainstay Length | 420mm |
| Chainstay Length Horizontal | 418.8mm |
| Front-Center | 699mm |
| Front-Center Horizontal | 698.2mm |
| Wheelbase | 1117mm |
| Fork Offset/Rake | 44mm |
| Trail | 106.6mm very high |
| Mechanical Trail | 98.5mm |
| Wheel Flop | 37.8mm |
| Standover Height | 709mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 153.3mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 163.7mm |
Carbon, 29er, 120mm rear, 120mm fork Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1858.4mm |
| Crank Length | 175mm |
| Handlebar Width | 780mm |
| Stem Length | 60mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 120mm |
| Rear Travel | 120mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 1 in to 5 ft 5 in |
Source:https://www.norco.com/bikes/2021/mountain/xc-race/revolver-fs-120/revolver-fs-axs-120/