2020 -100 Fork Carbonda FM-936 Base xl
Build
700C/29 in × 2.3 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Carbonda FM-936
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension cross-country mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 624.4mm |
| Reach | 510mm |
| Stack to Reach Ratio | 1.22:1 |
| Seat Tube Length, C-T | 540mm |
| Top Tube Length, Effective/Horizontal Center | 664.2mm |
| Head Tube Angle | 67deg |
| Effective Seat Tube Angle, Seat Tube Top | 77deg |
| Head Tube Length | 140mm |
| Bottom Bracket Drop | 45mm |
| Bottom Bracket Height | 324.4mm |
| Chainstay Length | 438mm |
| Chainstay Length Horizontal | 435.7mm |
| Front-Center | 817.2mm |
| Front-Center Horizontal | 815.9mm |
| Wheelbase | 1251.6mm |
| Fork Offset/Rake | 55.2mm |
| Fork Length (Axle-To-Crown) | 506mm |
| Trail | 96.8mm very high |
| Mechanical Trail | 89.1mm |
| Wheel Flop | 34.8mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 277.8mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 154.4mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.3in |
| Tire Outer Diameter | 738.8mm |
| Bike Length with Tires | 1990.4mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 100mm |
| Rear Travel | Unknown |
| Suspension Sag | 25% |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:http://www.carbonda.com/mountain/full-suspension/98.html