2020 Salsa Cycles Spearfish Carbon SLX (High flip chip position) SM
Build
700C/29 in × 2.35 in
Insights
Somewhat upright stack and reach vs trend of full-suspension cross-country mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 606mm |
| Reach | 425mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, C-T | 419mm |
| Top Tube Length, Effective/Horizontal HT Top | 592mm |
| Top Tube Slope | 20.6deg |
| Head Tube Angle | 68deg |
| Seat Tube Angle | 74.5deg |
| Head Tube Length | 103mm |
| Bottom Bracket Drop | 36mm |
| Bottom Bracket Height | 334.7mm |
| Chainstay Length | 432mm |
| Chainstay Length Horizontal | 430.5mm |
| Front-Center | 710.4mm |
| Front-Center Horizontal | 709.5mm |
| Wheelbase | 1140mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 531mm |
| Trail | 94.8mm very high |
| Mechanical Trail | 87.9mm |
| Wheel Flop | 32.9mm |
| Standover Height | 736mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 169.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 164.7mm |
Carbon SLX (High flip chip position) Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1881.4mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | Unknown |
| Suspension Sag | 25% |
| Frame Material | Unknown |
| Fork Material | Aluminum |
| Brake Type | Rim |
Published Sizing Recommendations
| Height | 165 cm to 173 cm |
Source:https://salsacycles.com/bikes/spearfish/2020_spearfish_carbon_slx