2020 Salsa Cycles Spearfish Carbon XTR (Flip Chip Low Position) SM
Build
700C/29 in × 2.35 in
Insights
Somewhat upright stack and reach vs trend of full-suspension cross-country mtb bikes
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 608mm |
| Reach | 423mm |
| Stack to Reach Ratio | 1.44:1 |
| Seat Tube Length, C-T | 419mm |
| Top Tube Length, Effective/Horizontal HT Top | 593mm |
| Top Tube Slope | 20.9deg |
| Head Tube Angle | 67.8deg |
| Seat Tube Angle | 74.3deg |
| Head Tube Length | 103mm |
| Bottom Bracket Drop | 39mm |
| Bottom Bracket Height | 331.7mm |
| Chainstay Length | 433mm |
| Chainstay Length Horizontal | 431.2mm |
| Front-Center | 709.8mm |
| Front-Center Horizontal | 708.8mm |
| Wheelbase | 1140mm |
| Fork Offset/Rake | 51mm |
| Fork Length (Axle-To-Crown) | 531mm |
| Trail | 96.2mm very high |
| Mechanical Trail | 89.1mm |
| Wheel Flop | 33.7mm |
| Standover Height | 731.7mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 169.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 161.7mm |
Carbon XTR (Flip Chip Low Position) Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 1881.4mm |
| Crank Length | 170mm |
| Handlebar Width | 760mm |
| Stem Length | 50mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 120mm |
| Rear Travel | Unknown |
| Suspension Sag | 25% |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 5 in to 5 ft 8 in |
Source:https://salsacycles.com/bikes/spearfish/2020_spearfish_carbon_xtr