2020 Cannondale Bikes Scalpel Carbon 3 XL
Build
700C/29 in × 2.25 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Cannondale Bikes Scalpel
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 610mm |
| Reach | 475mm |
| Stack to Reach Ratio | 1.28:1 |
| Seat Tube Length, C-T | 520mm |
| Top Tube Length, Effective/Horizontal HT Top | 644mm |
| Head Tube Angle | 68deg |
| Effective Seat Tube Angle, ETT HT Top | 74.5deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 40mm |
| Bottom Bracket Height | 328.2mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 433.2mm |
| Front-Center | 766mm |
| Front-Center Horizontal | 765.8mm |
| Wheelbase | 1199mm |
| Fork Offset/Rake | 55mm |
| Trail | 89.4mm very high |
| Mechanical Trail | 82.9mm |
| Wheel Flop | 31.1mm |
| Standover Height | 748mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 227.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 158.2mm |
Carbon 3 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.25in |
| Tire Outer Diameter | 736.3mm |
| Bike Length with Tires | 1935.3mm |
| Handlebar Width | 760mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 185 cm to 195 cm |
Source:https://www.cannondale.com/en/bikes/mountain/cross-country/scalpel/scalpel-carbon-3?sku=c24401m10sm