2020 Cannondale Bikes Scalpel Carbon 3 S
Build
650B/27.5 in × 2.25 in
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Cannondale Bikes Scalpel
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 582mm |
| Reach | 415mm |
| Stack to Reach Ratio | 1.4:1 |
| Seat Tube Length, C-T | 430mm |
| Top Tube Length, Effective/Horizontal HT Top | 576mm |
| Head Tube Angle | 68deg |
| Effective Seat Tube Angle, ETT HT Top | 74.5deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 40mm |
| Bottom Bracket Height | 309.2mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 433.2mm |
| Front-Center | 695mm |
| Front-Center Horizontal | 694.8mm |
| Wheelbase | 1128mm |
| Fork Offset/Rake | 55mm |
| Trail | 81.8mm very high |
| Mechanical Trail | 75.8mm |
| Wheel Flop | 28.4mm |
| Standover Height | 743mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 175.9mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 139.2mm |
Carbon 3 Build
| Wheel Size | 650B, 27.5 inch (584mm BSD) |
| Tire Width | 2.25in |
| Tire Outer Diameter | 698.3mm |
| Bike Length with Tires | 1826.3mm |
| Handlebar Width | 760mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | N/A |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 154 cm to 165 cm |
Source:https://www.cannondale.com/en/bikes/mountain/cross-country/scalpel/scalpel-carbon-3?sku=c24401m10sm