2020 Orbea Alma H50 M-29”
Build
700C/29 in × 2.2 in
Insights
Average stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Orbea Alma
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 609mm |
| Reach | 409mm |
| Stack to Reach Ratio | 1.49:1 |
| Seat Tube Length, C-T | 445mm |
| Top Tube Length, Effective/Horizontal Center | 588mm |
| Top Tube Slope | 18.8deg |
| Head Tube Angle | 69deg |
| Seat Tube Angle | 73.5deg |
| Head Tube Length | 105mm |
| Bottom Bracket Drop | 61mm |
| Bottom Bracket Height | 305.9mm |
| Chainstay Length Horizontal | 436mm |
| Front-Center | 658.8mm |
| Front-Center Horizontal | 656mm |
| Wheelbase | 1092mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 500.8mm |
| Trail | 93.7mm very high |
| Mechanical Trail | 87.5mm |
| Wheel Flop | 31.4mm |
| Standover Height | 735mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 122mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 135.9mm |
H50 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.2in |
| Tire Outer Diameter | 733.8mm |
| Bike Length with Tires | 1825.8mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 100mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:https://www.orbea.com/se-en/bicycles/mountain/alma/cat/alma-29-h50