2020 Orbea Laufey Base M
Build
700C/29 in × 2.6 in
Insights
Somewhat upright stack and reach vs trend of hardtail all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 636mm |
| Reach | 435mm |
| Stack to Reach Ratio | 1.46:1 |
| Seat Tube Length, C-T | 432mm |
| Top Tube Length, Effective/Horizontal Center | 606mm |
| Top Tube Slope | 21.8deg |
| Head Tube Angle | 65.5deg |
| Seat Tube Angle | 75deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 63.5mm |
| Bottom Bracket Height | 313.5mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 430.3mm |
| Front-Center | 746.4mm |
| Front-Center Horizontal | 743.7mm |
| Wheelbase | 1174mm |
| Fork Offset/Rake | 44mm |
| Fork Length, Unknown | 547mm |
| Trail | 123.5mm very high |
| Mechanical Trail | 112.4mm |
| Wheel Flop | 46.6mm |
| Standover Height | 714mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 199.3mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 143.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1928.1mm |
| Crank Length | 170mm |
| Handlebar Width | 780mm |
| Stem Length | 45mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 140mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 160 cm to 175 cm |
Source:https://www.orbea.com/fr-fr/velos/montagne/laufey/cat/laufey-h30