2020 Orbea Avant M40TEAM-D 60
Build
700C/29 in × 28 mm
Insights
Average stack and reach vs trend of endurance road bikes
Design deviates from other sizes of Orbea Avant
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 635mm |
| Reach | 398mm |
| Stack to Reach Ratio | 1.6:1 |
| Seat Tube Length, C-T | 560mm |
| Top Tube Length, Effective/Horizontal HT Top | 592mm |
| Top Tube Slope | 10deg |
| Head Tube Angle | 73deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 221mm |
| Bottom Bracket Drop | 73mm |
| Bottom Bracket Height | 266mm |
| Chainstay Length | 415mm |
| Chainstay Length Horizontal | 408.5mm |
| Front-Center | 620.8mm |
| Front-Center Horizontal | 616.5mm |
| Wheelbase | 1025mm |
| Fork Offset/Rake | 45mm |
| Trail | 56.6mm mid/neutral |
| Mechanical Trail | 54.1mm |
| Wheel Flop | 15.8mm |
| Standover Height | 857.3mm |
| Tire to Pedal Spindle Distance With 175 mm cranks | 106.8mm |
| Pedal Spindle to Ground Clearance With 175 mm cranks | 91mm |
M40TEAM-D Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 28mm |
| Tire Outer Diameter | 678mm |
| Bike Length with Tires | 1703mm |
| Crank Length | 175mm |
| Handlebar Width | 440mm |
| Stem Length | 120mm |
| Stem Angle | -6deg |
| Suspension Type | Rigid, non-suspension corrected |
| Bar Type | Drop Bar |
| Frame Material | Carbon/Composite |
| Fork Material | Carbon/Composite |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 192 cm to 207 cm |
Source:https://www.orbea.com/gb-en/bicycles/road/avant/cat/avant-m40team-d