2020 Orbea Avant M40TEAM-D 47
Build
700C/29 in × 28 mm
Insights
Average stack and reach vs trend of endurance road bikes
Design deviates from other sizes of Orbea Avant
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 520mm |
| Reach | 364mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, C-T | 410mm |
| Top Tube Length, Effective/Horizontal HT Top | 508mm |
| Top Tube Slope | 14.8deg |
| Head Tube Angle | 71deg |
| Seat Tube Angle | 74.5deg |
| Head Tube Length | 108mm |
| Bottom Bracket Drop | 75mm |
| Bottom Bracket Height | 264mm |
| Chainstay Length | 415mm |
| Chainstay Length Horizontal | 408.2mm |
| Front-Center | 574.8mm |
| Front-Center Horizontal | 569.8mm |
| Wheelbase | 978mm |
| Fork Offset/Rake | 50mm |
| Fork Length (On-Axis) | 380mm |
| Trail | 63.9mm mid/neutral |
| Mechanical Trail | 60.4mm |
| Wheel Flop | 19.7mm |
| Standover Height | 727.5mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 65.8mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 94mm |
M40TEAM-D Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 28mm |
| Tire Outer Diameter | 678mm |
| Bike Length with Tires | 1656mm |
| Crank Length | 170mm |
| Handlebar Width | 400mm |
| Stem Length | 90mm |
| Stem Angle | -6deg |
| Suspension Type | Rigid, non-suspension corrected |
| Bar Type | Drop Bar |
| Frame Material | Carbon/Composite |
| Fork Material | Carbon/Composite |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 155 cm to 160 cm |
Source:https://www.orbea.com/gb-en/bicycles/road/avant/cat/avant-m40team-d