Bike-on-Bike
Default Config
Insights
Average stack and reach vs trend of full-suspension cross-country mtb bikes
Design deviates from other sizes of Cannondale Scalpel
Geometry
Stack | 597mm | — |
Reach | 425mm | — |
Stack to Reach Ratio | 1.4:1 | — |
Seat Tube Length, C-T | 380mm | — |
Top Tube Length, Effective/Horizontal Center | 579mm | — |
Top Tube Length, Actual C-C | 536mm | — |
Head Tube Angle | 66.6deg | — |
Effective Seat Tube Angle, ETT Center | 75.5deg | — |
Head Tube Length | 90mm | — |
Bottom Bracket Drop | 42mm | — |
Bottom Bracket Height | 330mm | — |
Chainstay Length | 434mm | — |
Chainstay Length Horizontal | 432mm | — |
Front-Center | 709mm | — |
Front-Center Horizontal | 708mm | — |
Wheelbase | 1140mm | — |
Fork Offset/Rake | 44mm | — |
Fork Length (Axle-To-Crown) | 530mm | — |
Trail | 113mm very high | — — |
Mechanical Trail | 103.7mm | — |
Wheel Flop | 41.2mm | — |
Standover Height | 736mm | — |
Tire to Pedal Spindle | 167mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 160mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 743.9mm | — |
Bike Length with Tires | 1883.9mm | — |
Handlebar Width | 760mm | — |
Stem Length | 60mm | — |
Stem Angle | -6deg | — |
| Suspension Type | Full suspension | — |
| Bar Type | Flat Bar | — |
| Fork Travel | 120mm | — |
| Rear Travel | 120mm | — |
| Suspension Sag | 11% | — |
| Frame Material | Carbon/Composite | — |
| Fork Material | Unknown | — |
| Brake Type | Unknown | — |
Meta
| Actions | — | |
| Source | https://www.cannondale.com/en-au/bikes/mountain/cross-country/scalpel/scalpel-1 | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |