Bike-on-Bike
Default Config
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 652mm | — |
Reach | 510mm | — |
Stack to Reach Ratio | 1.28:1 | — |
Seat Tube Length, C-T | 460mm | — |
Top Tube Length, Effective/Horizontal Center | 644mm | — |
Top Tube Slope | 18.5deg | — |
Head Tube Angle | 64deg | — |
Seat Tube Angle | 78deg | — |
Head Tube Length | 135mm | — |
Bottom Bracket Drop | -17mm | — |
Bottom Bracket Height | 389mm | — |
Chainstay Length | 455mm | — |
Chainstay Length Horizontal | 454.7mm | — |
Front-Center | 872mm | — |
Front-Center Horizontal | 873.3mm | — |
Wheelbase | 1328mm | — |
Fork Offset/Rake | 44mm | — |
Trail | 132.5mm very high | — — |
Mechanical Trail | 119.1mm | — |
Wheel Flop | 52.2mm | — |
Standover Height | 727mm | — |
Tire to Pedal Spindle | 330mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 219mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 743.9mm | — |
Bike Length with Tires | 2071.9mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 180mm | — |
| Rear Travel | 158mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://geometrygeeks.bike/bike/pole-evolink-158-2020/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |