Bike-on-Bike
Default Config
Insights
Very upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Geometry
Stack | 660mm | — |
Reach | 450mm | — |
Stack to Reach Ratio | 1.47:1 | — |
Seat Tube Length, C-T | 420mm | — |
Top Tube Length, Effective/Horizontal Center | 577mm | — |
Head Tube Angle | 63.9deg | — |
Effective Seat Tube Angle, ETT Center | 79deg | — |
Head Tube Length | 135mm | — |
Bottom Bracket Drop | 20mm | — |
Bottom Bracket Height | 352mm | — |
Chainstay Length | 455mm | — |
Chainstay Length Horizontal | 454.6mm | — |
Front-Center | 820.7mm | — |
Front-Center Horizontal | 820mm | — |
Wheelbase | 1275mm | — |
Fork Offset/Rake | 51mm | — |
Trail | 125.4mm very high | — — |
Mechanical Trail | 112.6mm | — |
Wheel Flop | 49.6mm | — |
Standover Height | 360mm | — |
Tire to Pedal Spindle | 278.7mm 170 mm cranks | — |
Pedal Spindle to Ground Clearance | 182mm 170 mm cranks | — |
Build
Wheel Size | 700C/29 in 622 mm BSD | — — |
Tire Width | 2.4in | — |
Tire Outer Diameter | 743.9mm | — |
Bike Length with Tires | 2018.9mm | — |
| Suspension Type | Full suspension | — |
| Bar Type | Moto/Klunker/Riser Bar | — |
| Fork Travel | 180mm | — |
| Rear Travel | 160mm | — |
| Suspension Sag | Unknown | — |
| Frame Material | Aluminum | — |
| Fork Material | Unknown | — |
| Brake Type | Disc | — |
Meta
| Actions | — | |
| Source | https://geometrygeeks.bike/bike/pole-machine-2018/ | — |
| Brand | — | |
| Bike | — | |
| Size | — | |
| Category | — |