2023 Ibis Cycles Inc. HD6 Base
- Design
- Flat Bar, Full suspension
- Suspension
- 180mm fork travel, 165mm rear travel
Suspension sag unknown Geometry may mis-represent actual riding geometry | Somewhat upright stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Average stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Average stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Average stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry | Average stack and reachvs category Suspension sag unknown Geometry may mis-represent actual riding geometry |
Geometry
NA | 1 | 2 | 3 | 4 | 5 | |
Stack | — | 621mm | 625mm | 630mm | 638mm | 651mm |
Reach | — | 430mm | 454mm | 480mm | 508mm | 541mm |
Stack to Reach Ratio | — | 1.44:1 | 1.38:1 | 1.31:1 | 1.26:1 | 1.2:1 |
Seat Tube Length, C-T | — | 400mm | 400mm | 406mm | 450mm | 470mm |
Top Tube Length, Effective/Horizontal Center | — | 585mm | 610mm | 630mm | 655mm | 685mm |
Top Tube Slope | — | 23.9deg | 23.3deg | 22.3deg | 18.1deg | 16.6deg |
Head Tube Angle | — | 64deg | 64deg | 64deg | 64deg | 64deg |
Seat Tube Angle | — | 76deg | 76deg | 76.5deg | 77deg | 77.5deg |
Head Tube Length | — | 81mm | 86mm | 91mm | 100mm | 115mm |
Bottom Bracket Drop | — | 30mm | 30mm | 30mm | 30mm | 30mm |
Bottom Bracket Height | — | 342mm | 342mm | 342mm | 342mm | 342mm |
Chainstay Length | — | 435mm | 435mm | 435mm | 435mm | 435mm |
Chainstay Length Horizontal | — | 434mm | 434mm | 434mm | 434mm | 434mm |
Front-Center | — | 768.6mm | 794.6mm | 822.6mm | 854.6mm | 894.5mm |
Front-Center Horizontal | — | 768mm | 794mm | 822mm | 854mm | 894mm |
Wheelbase | — | 1202mm | 1228mm | 1256mm | 1288mm | 1328mm |
Fork Offset/Rake | — | 44mm | 44mm | 44mm | 44mm | 44mm |
Trail | — — | 132.5mm very high | 132.5mm very high | 132.5mm very high | 132.5mm very high | 132.5mm very high |
Mechanical Trail | — | 119.1mm | 119.1mm | 119.1mm | 119.1mm | 119.1mm |
Wheel Flop | — | 52.2mm | 52.2mm | 52.2mm | 52.2mm | 52.2mm |
Standover Height | — | 725mm | 735mm | 752mm | 765mm | 769mm |
Tire to Pedal Spindle | — 170 mm cranks | 226.7mm 170 mm cranks | 252.6mm 170 mm cranks | 280.6mm 170 mm cranks | 312.6mm 170 mm cranks | 352.6mm 170 mm cranks |
Pedal Spindle to Ground Clearance | — 170 mm cranks | 172mm 170 mm cranks | 172mm 170 mm cranks | 172mm 170 mm cranks | 172mm 170 mm cranks | 172mm 170 mm cranks |
Base Build
NA | 1 | 2 | 3 | 4 | 5 | |
Wheel Size | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD | 700C/29 in 622 mm BSD |
Tire Width | 2.4mm | 2.4in | 2.4in | 2.4in | 2.4in | 2.4in |
Tire Outer Diameter | 626.8mm | 743.9mm | 743.9mm | 743.9mm | 743.9mm | 743.9mm |
Bike Length with Tires | — | 1945.9mm | 1971.9mm | 1999.9mm | 2031.9mm | 2071.9mm |
Published Sizing Recommendations
Height | — | 5 ft 2 in to 5 ft 6 in | 5 ft 5 in to 5 ft 9 in | 5 ft 8 in to 6 ft 0 in | 5 ft 11 in to 6 ft 3 in | 6 ft 2 in to 6 ft 7 in |
Stack and Reach vs. Category Trend
Very Upright
Somewhat Upright
Average
Somewhat Aggressive
Very Aggressive
The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.
Learn more about the Upright/Aggressive ScaleCategory Trend
Full-suspension All-mountain/Enduro MTBSource:www.ibiscycles.com