2023 Ibis Cycles Inc. HD6 Base 1
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 621mm |
| Reach | 430mm |
| Stack to Reach Ratio | 1.44:1 |
| Seat Tube Length, C-T | 400mm |
| Top Tube Length, Effective/Horizontal Center | 585mm |
| Top Tube Slope | 23.9deg |
| Head Tube Angle | 64deg |
| Seat Tube Angle | 76deg |
| Head Tube Length | 81mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 342mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434mm |
| Front-Center | 768.6mm |
| Front-Center Horizontal | 768mm |
| Wheelbase | 1202mm |
| Fork Offset/Rake | 44mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 119.1mm |
| Wheel Flop | 52.2mm |
| Standover Height | 725mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 226.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 172mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1945.9mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 180mm |
| Rear Travel | 165mm |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
Published Sizing Recommendations
| Height | 5 ft 2 in to 5 ft 6 in |
Source:https://www.ibiscycles.com/bikes/hd6