2020 Orbea Occam Fox 36 150 mm upgrade

	Small	Medium	Large	Extra Large
Stack	607mm	617mm	631mm	650mm
Reach	420mm	445mm	469mm	495mm
Stack to Reach Ratio	1.45:1	1.39:1	1.35:1	1.31:1
Seat Tube Length, C-T	381mm	417mm	457mm	508mm
Top Tube Slope	24.9deg	21.3deg	18deg	14.3deg
Head Tube Angle	65.5deg	65.5deg	65.5deg	65.5deg
Seat Tube Angle	76.5deg	76.5deg	76.5deg	76.5deg
Head Tube Length	95mm	105mm	120mm	140mm
Bottom Bracket Drop	31mm	31mm	31mm	31mm
Bottom Bracket Height	341mm	341mm	341mm	341mm
Chainstay Length	440mm	440mm	440mm	440mm
Chainstay Length Horizontal	438.9mm	438.9mm	438.9mm	438.9mm
Front-Center	730.8mm	759.7mm	789.7mm	823.7mm
Front-Center Horizontal	730.1mm	759.1mm	789.1mm	823.1mm
Wheelbase	1169mm	1198mm	1228mm	1262mm
Fork Offset/Rake	44mm	44mm	44mm	44mm
Fork Length, Unknown	557mm	557mm	557mm	557mm
Trail	121.2mm very high	121.2mm very high	121.2mm very high	121.2mm very high
Mechanical Trail	110.3mm	110.3mm	110.3mm	110.3mm
Wheel Flop	45.7mm	45.7mm	45.7mm	45.7mm
Tire to Pedal Spindle	188.8mm 170 mm cranks	217.8mm 170 mm cranks	242.7mm 175 mm cranks	276.7mm 175 mm cranks
Pedal Spindle to Ground Clearance	171mm 170 mm cranks	171mm 170 mm cranks	166mm 175 mm cranks	166mm 175 mm cranks

Published Sizing Recommendations

Height

150 cm

165 cm

160 cm

175 cm

170 cm

185 cm

180 cm

198 cm

Very Upright

Somewhat Upright

Average

Somewhat Aggressive

Very Aggressive

The Bike Insights Upright/Aggressive scale is based on analysis of a bike’s proportions relative to similar sized bikes in the same category.

Category Trend

Source:manual calculations