2026 Hope Technology HB.916 Base H3
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Hope Technology HB.916
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 646mm |
| Reach | 490mm |
| Stack to Reach Ratio | 1.32:1 |
| Seat Tube Length, C-T | 440mm |
| Seat Tube Length, Unknown | 320mm |
| Top Tube Length, Effective/Horizontal Center | 631mm |
| Head Tube Angle | 64deg |
| Seat Tube Angle, Unknown | 75.5deg |
| Effective Seat Tube Angle, Unknown | 77.7deg |
| Head Tube Length | 120mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 344.5mm |
| Chainstay Length | 450mm |
| Chainstay Length Horizontal | 449mm |
| Front-Center | 840mm |
| Front-Center Horizontal | 839.5mm |
| Wheelbase | 1288.5mm |
| Fork Offset/Rake | 44mm |
| Trail | 133.7mm very high |
| Mechanical Trail | 120.2mm |
| Wheel Flop | 52.7mm |
| Standover Height | 725mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 295.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 174.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 2037.5mm |
| Suspension Type | Full suspension |
| Bar Type | Flat Bar |
| Fork Travel | 170mm |
| Rear Travel | 160mm |
| Suspension Sag | 30% |
| Frame Material | Carbon/Composite |
| Fork Material | Aluminum |
| Brake Type | Disc |
Published Sizing Recommendations
| PBH | 750 in to |
Source:www.hopetechhb.com