2025 Ibis Cycles Inc. Ripley Base MD
Build
700C/29 in × 2.4 mm
Insights
Average stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripley
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension trail mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 619mm |
| Reach | 460mm |
| Stack to Reach Ratio | 1.35:1 |
| Seat Tube Length, C-T | 400mm |
| Top Tube Length, Effective/Horizontal HT Top | 604mm |
| Top Tube Slope | 22.6deg |
| Head Tube Angle | 64.9deg |
| Seat Tube Angle | 76.9deg |
| Head Tube Length | 95mm |
| Bottom Bracket Drop | 45mm |
| Bottom Bracket Height | 268.4mm |
| Chainstay Length | 436mm |
| Chainstay Length Horizontal | 433.7mm |
| Front-Center | 778.6mm |
| Front-Center Horizontal | 777.3mm |
| Wheelbase | 1211mm |
| Fork Offset/Rake | 43.9mm |
| Trail | 98.3mm very high |
| Mechanical Trail | 89.1mm |
| Wheel Flop | 37.8mm |
| Standover Height | 721mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 300.3mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 103.4mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4mm |
| Tire Outer Diameter | 626.7mm |
| Bike Length with Tires | 1837.7mm |
| Crank Length | 165mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 140mm |
| Rear Travel | 130mm |
| Suspension Sag | 20% |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 5 ft 5 in to 5 ft 9 in |
Source:www.ibiscycles.com