2026 Bracken Gravel Bike - 3D Printed Ti Base S 52cm
Build
700C/29 in × 50 mm
Insights
Average stack and reach vs trend of all-road/gravel bikes
Design deviates from other sizes of Bracken Gravel Bike - 3D Printed Ti
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 560mm |
| Reach | 380mm |
| Stack to Reach Ratio | 1.47:1 |
| Seat Tube Length, Unknown | 480mm |
| Top Tube Length, Effective/Horizontal Center | 535.3mm |
| Top Tube Slope | 10.9deg |
| Head Tube Angle | 70deg |
| Seat Tube Angle | 74.5deg |
| Head Tube Length | 136.6mm |
| Bottom Bracket Drop | 77mm |
| Bottom Bracket Height | 284mm |
| Chainstay Length | 415mm |
| Chainstay Length Horizontal | 407.8mm |
| Front-Center | 615mm |
| Front-Center Horizontal | 610.1mm |
| Wheelbase | 1017.9mm |
| Fork Offset/Rake | 50mm |
| Fork Length (Axle-To-Crown) | 395mm |
| Trail | 78.2mm high |
| Mechanical Trail | 73.5mm |
| Wheel Flop | 25.1mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 84mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 114mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 50mm |
| Tire Outer Diameter | 722mm |
| Bike Length with Tires | 1739.9mm |
| Suspension Type | Rigid, non-suspension corrected |
| Bar Type | Drop Bar |
| Frame Material | Titanium |
| Fork Material | Carbon/Composite |
| Brake Type | Disc |
Source:www.blackwaterbicycles.com