2027 Starling Cycles Murmur V3 150mm Fork S
Build
700C/29 in × 2.4 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Starling Cycles Murmur V3
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 602mm |
| Reach | 425mm |
| Stack to Reach Ratio | 1.42:1 |
| Seat Tube Length, C-T | 375mm |
| Top Tube Length, Effective/Horizontal HT Top | 571mm |
| Head Tube Angle | 65deg |
| Effective Seat Tube Angle, Unknown | 79.2deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 46mm |
| Bottom Bracket Height | 326mm |
| Chainstay Length | 455mm |
| Chainstay Length Horizontal | 452.7mm |
| Front-Center | 751.7mm |
| Front-Center Horizontal | 750.3mm |
| Wheelbase | 1203mm |
| Fork Offset/Rake | 44mm |
| Trail | 124.9mm very high |
| Mechanical Trail | 113.2mm |
| Wheel Flop | 47.8mm |
| Standover Height | 820mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 209.8mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 156mm |
150mm Fork Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1946.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 150mm |
| Rear Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:www.starlingcycles.com