2027 Yeti Cycles MT Base MD
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 625mm |
| Reach | 460mm |
| Stack to Reach Ratio | 1.36:1 |
| Seat Tube Length, C-T | 420mm |
| Top Tube Length, Effective/Horizontal HT Top | 604mm |
| Head Tube Angle | 64.5deg |
| Effective Seat Tube Angle, Unknown | 77deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 32.5mm |
| Bottom Bracket Height | 342mm |
| Chainstay Length Horizontal | 440mm |
| Front-Center | 792mm |
| Front-Center Horizontal | 792mm |
| Wheelbase | 1232mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 576mm |
| Trail | 129.9mm very high |
| Mechanical Trail | 117.2mm |
| Wheel Flop | 50.5mm |
| Standover Height | 733mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 247.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 172mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1981mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 160mm |
| Rear Travel | 140mm |
| Suspension Sag | Unknown |
| Frame Material | Carbon/Composite |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:yeticycles.com