2026 FRAMEWORKS Racing Enduro Base S
Build
700C/29 in × 2.5 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of FRAMEWORKS Racing Enduro
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 637mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.45:1 |
| Seat Tube Length, Unknown | 360mm |
| Top Tube Slope | 28.5deg |
| Head Tube Angle | 63.75deg |
| Seat Tube Angle | 75.15deg |
| Head Tube Length | 100mm |
| Bottom Bracket Drop | 37mm |
| Bottom Bracket Height | 337.5mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 443.5mm |
| Front-Center | 787mm |
| Front-Center Horizontal | 786.1mm |
| Wheelbase | 1229.6mm |
| Fork Offset/Rake | 44mm |
| Fork Length (On-Axis) | 587.7mm |
| Trail | 135.6mm very high |
| Mechanical Trail | 121.6mm |
| Wheel Flop | 53.8mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 242.5mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 167.5mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1978.6mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 170mm |
| Rear Travel | 170mm |
| Suspension Sag | Unknown |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:rideframeworks.com