2026 Turner Bikes Venn Base XL
Build
700C/29 in × 2.6 in
Insights
Somewhat upright stack and reach vs trend of hardtail cross-country mtb bikes
Design deviates from other sizes of Turner Bikes Venn
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 670mm |
| Reach | 470mm |
| Stack to Reach Ratio | 1.43:1 |
| Seat Tube Length, C-T | 530mm |
| Top Tube Length, Effective/Horizontal Center | 680mm |
| Top Tube Slope | 14.6deg |
| Head Tube Angle | 67deg |
| Seat Tube Angle | 73deg |
| Head Tube Length | 160mm |
| Bottom Bracket Drop | 62mm |
| Bottom Bracket Height | 315mm |
| Chainstay Length | 445mm |
| Chainstay Length Horizontal | 440.7mm |
| Front-Center | 785.8mm |
| Front-Center Horizontal | 783.3mm |
| Wheelbase | 1224mm |
| Fork Offset/Rake | 50.9mm |
| Fork Length (Axle-To-Crown) | 509mm |
| Trail | 104.8mm very high |
| Mechanical Trail | 96.5mm |
| Wheel Flop | 37.7mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 238.8mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 145mm |
Base Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.6in |
| Tire Outer Diameter | 754.1mm |
| Bike Length with Tires | 1978.1mm |
| Suspension Type | Hardtail (Front suspension) |
| Bar Type | Flat Bar |
| Fork Travel | 130mm |
| Suspension Sag | Unknown |
| Frame Material | Titanium |
| Fork Material | Unknown |
| Brake Type | Disc |
Published Sizing Recommendations
| Height | 6 ft 2 in to 6 ft 6 in |
Source:Turnerbikes.com