2026 v2 Ibis Cycles Inc. Ripmo AF Frameset XM (MX)
Build
700C/29 in × 2.5 in
Insights
Average stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Ibis Cycles Inc. Ripmo AF
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 633mm |
| Reach | 478mm |
| Stack to Reach Ratio | 1.32:1 |
| Seat Tube Length, C-T | 415mm |
| Top Tube Length, Effective/Horizontal HT Top | 630mm |
| Top Tube Slope | 21.8deg |
| Head Tube Angle | 64.5deg |
| Seat Tube Angle | 76.5deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 30.5mm |
| Bottom Bracket Height | 344mm |
| Chainstay Length | 433mm |
| Chainstay Length Horizontal | 431.9mm |
| Front-Center | 817.6mm |
| Front-Center Horizontal | 817.1mm |
| Wheelbase | 1249mm |
| Fork Offset/Rake | 46.7mm |
| Fork Length (Axle-To-Crown) | 575mm |
| Trail | 126.9mm very high |
| Mechanical Trail | 114.6mm |
| Wheel Flop | 49.3mm |
| Standover Height | 757mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 273.1mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 174mm |
Frameset Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.5in |
| Tire Outer Diameter | 749mm |
| Bike Length with Tires | 1998mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 160mm |
| Rear Travel | 150mm |
| Suspension Sag | 25% |
| Frame Material | Aluminum |
| Fork Material | Unknown |
| Brake Type | Unknown |
Source:www.ibiscycles.com