2026 Norco Range VLT CX C1 4
Build
700C/29 in × 2.35 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Norco Range VLT CX
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 650mm |
| Reach | 491mm |
| Stack to Reach Ratio | 1.32:1 |
| Seat Tube Length, C-T | 445mm |
| Top Tube Length, Effective/Horizontal Unknown | 637mm |
| Head Tube Angle | 63.5deg |
| Head Tube Length | 135mm |
| Bottom Bracket Drop | 20.5mm |
| Bottom Bracket Height | 350.2mm |
| Chainstay Length | 440mm |
| Chainstay Length Horizontal | 439.5mm |
| Front-Center | 855.7mm |
| Front-Center Horizontal | 855.5mm |
| Wheelbase | 1295mm |
| Fork Offset/Rake | 44mm |
| Trail | 135.7mm very high |
| Mechanical Trail | 121.4mm |
| Wheel Flop | 54.2mm |
| Standover Height | 718mm |
| Tire to Pedal Spindle Distance With 165 mm cranks | 320mm |
| Pedal Spindle to Ground Clearance With 165 mm cranks | 185.2mm |
C1 Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.35in |
| Tire Outer Diameter | 741.4mm |
| Bike Length with Tires | 2036.4mm |
| Crank Length | 165mm |
| Stem Length | 40mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | Unknown |
| Rear Travel | Unknown |
| Suspension Sag | Unknown |
| Frame Material | Unknown |
| Fork Material | Unknown |
| Brake Type | Unknown |
| Features | E-bike |
Source:https://www.norco.com/bikes/e-mountain/e-enduro/range-vlt-cx/2026-range-vlt-cx-c1/?srsltid=AfmBOorc3sIdTdm9yw3pQgt3SHlJqpGkXybSO6Mwc1hNMf6mP7N3g_nC