2026 Stinner Frameworks Romero LT M/L
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension all-mountain/enduro mtb bikes
Design deviates from other sizes of Stinner Frameworks Romero
Suspension sag unknown
Geometry may mis-represent actual riding geometry
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension all-mountain/enduro mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 658.5mm |
| Reach | 480mm |
| Stack to Reach Ratio | 1.37:1 |
| Seat Tube Length, Unknown | 400mm |
| Head Tube Angle | 64deg |
| Effective Seat Tube Angle, ETT HT Top | 78.4deg |
| Seat Tube Exit Angle | 73.4deg |
| Head Tube Length | 125mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 342mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434mm |
| Front-Center | 818.6mm |
| Front-Center Horizontal | 818mm |
| Wheelbase | 1252mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 583.7mm |
| Trail | 132.5mm very high |
| Mechanical Trail | 119.1mm |
| Wheel Flop | 52.2mm |
| Standover Height | 853mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 276.6mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 172mm |
LT Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1995.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 170mm |
| Rear Travel | 150mm |
| Suspension Sag | Unknown |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://www.stinnerframeworks.com/collections/romero-model-landing-page/products/romero-long-travel-eagle