2026 Stinner Frameworks Romero MT S
Build
700C/29 in × 2.4 in
Insights
Somewhat upright stack and reach vs trend of full-suspension trail mtb bikes
Design deviates from other sizes of Stinner Frameworks Romero
Bar type unusual for category
This: Moto/Klunker/Riser Bar
Category: Flat Bar
vs full-suspension trail mtb bikesCategory: Flat Bar
Stack and Reach vs. Category Trend
View all sizes
Geometry
| Stack | 633mm |
| Reach | 440mm |
| Stack to Reach Ratio | 1.44:1 |
| Seat Tube Length, Unknown | 360mm |
| Head Tube Angle | 65deg |
| Effective Seat Tube Angle, ETT HT Top | 78.8deg |
| Seat Tube Exit Angle | 73.4deg |
| Head Tube Length | 110mm |
| Bottom Bracket Drop | 30mm |
| Bottom Bracket Height | 342mm |
| Chainstay Length | 435mm |
| Chainstay Length Horizontal | 434mm |
| Front-Center | 770.6mm |
| Front-Center Horizontal | 770mm |
| Wheelbase | 1204mm |
| Fork Offset/Rake | 44mm |
| Fork Length (Axle-To-Crown) | 563.7mm |
| Trail | 124.9mm very high |
| Mechanical Trail | 113.2mm |
| Wheel Flop | 47.8mm |
| Standover Height | 821mm |
| Tire to Pedal Spindle Distance With 170 mm cranks | 228.7mm |
| Pedal Spindle to Ground Clearance With 170 mm cranks | 172mm |
MT Build
| Wheel Size | 700C, 29 inch (622mm BSD) |
| Tire Width | 2.4in |
| Tire Outer Diameter | 743.9mm |
| Bike Length with Tires | 1947.9mm |
| Suspension Type | Full suspension |
| Bar Type | Moto/Klunker/Riser Bar |
| Fork Travel | 150mm |
| Rear Travel | 130mm |
| Suspension Sag | Unknown |
| Frame Material | Steel |
| Fork Material | Unknown |
| Brake Type | Disc |
Source:https://www.stinnerframeworks.com/collections/romero-model-landing-page/products/romero-medium-travel-frame-and-fork